- Service
- Private Combi Boiler Service
- Area
- Kuşadası, Aydın
- Response
- Usually same day
- Guarantee
- Parts and labour
- Phone
- +90 256 503 48 80
Which combi boiler faults do we fix in Kuşadası?
- Boiler not working at all or not igniting
- No hot water, or only lukewarm water
- Pressure constantly dropping or rising
- Radiators not heating up, bottom staying cold
- Fault code on the display (F, E, A codes)
- Noise from the boiler, frequent switching on and off
- Water leaks and dripping
- Fan, pump, heat exchanger and board faults
How our Kuşadası Private Combi Boiler Service works
- Request: call +90 256 503 48 80, message us on WhatsApp or fill in the form. Briefly tell us the brand and the fault.
- Appointment: we book a convenient time at your address in Kuşadası.
- Diagnosis: the technician diagnoses the fault on site and tells you the price.
- Repair: with your approval the repair is carried out; parts and labour are guaranteed.
Our combi boiler services
- Annual combi boiler service: Burner and combustion chamber cleaning, heat exchanger check, flue gas and fan check, expansion vessel pressure adjustment and testing of the safety systems.
- Combi boiler repair: Ignition, pump, fan, three-way valve, sensor and electronic board faults.
- Radiator flushing: Machine cleaning of the sediment and sludge built up in the system, so radiators that weren't heating work efficiently again.
- Pressure and pipework checks: Leak detection, bleed valve and valve checks.
Why does boiler pressure drop?
Ideally, boiler pressure should be between 1.2 and 1.5 bar when cold. If the pressure keeps dropping, there may be a small leak in the pipework or radiators, too little air in the expansion vessel or a fault in the pressure relief valve. You can raise the pressure temporarily with the filling tap under the boiler, but if it keeps happening, the problem won't be solved until the source is found.
If there's no hot water from the boiler
If the radiators heat up but no hot water comes from the tap, the problem is usually caused by the three-way valve, flow sensor or plate heat exchanger. Limescale in the plate heat exchanger is common throughout Aydın, where hard water is widespread.
When should a combi boiler be serviced?
A combi boiler should be serviced once a year, before the heating season starts (September–October). Regular servicing lowers fuel consumption, reduces the risk of breakdowns and keeps the boiler running safely.
Neighbourhoods we cover in Kuşadası
- Camikebir
- Hacıfeyzullah
- Türkmen
- Kadınlar Denizi
- Ege
- Değirmendere
- Karaova
- Davutlar
- Güzelçamlı
- Soğucak
- Yavansu
- İkiçeşmelik
- Bayraklıdede
- Alacamescit
- Kirazlı
Brands we service
- Daikin
- Bosch
- Ariston
- Demirdöküm
- Vaillant
- Viessmann
- Buderus
- ECA
- Baymak
- Airfel
- Alarko
- Ferroli
- Protherm
- Immergas
and all other brands. Evime Servis is a private technical service, not an authorised service of these brands.
Frequently asked questions
Can you come the same day for combi boiler repairs in Kuşadası?
Yes. Because we have a team on the Kuşadası centre, Davutlar and Güzelçamlı route every day, appointments are available at short notice. We reach most requests made before noon on the same day.
Which neighbourhoods does the Kuşadası Private Combi Boiler Service cover?
We cover all neighbourhoods and villages of Kuşadası, including Camikebir, Hacıfeyzullah, Türkmen, Kadınlar Denizi, Ege, Değirmendere, Karaova, Davutlar, Güzelçamlı, Soğucak, Yavansu, İkiçeşmelik, Bayraklıdede, Alacamescit, Kirazlı.
How much does combi boiler repair cost in Kuşadası?
The price depends on the model, the fault and any parts needed. Our technician diagnoses the fault on site and confirms the exact price before starting the repair.
How long does a combi boiler service take?
A standard combi boiler service takes about 1 hour. If radiator flushing is included, it can take 2–3 hours depending on the number of radiators.
What should the boiler pressure be?
When the boiler is cold, the pressure should be between 1.2 and 1.5 bar. It is normal for it to rise to around 2 bar while running; if it goes above 3 bar, call a technician.